DIY_Hardware Studded Clutch

HoliDIY TemplateDSC_1296

The hardware trend is one that I don't think should die out any time soon. DIY projects with supplies from the hardware store are inexpensive, industrial, and tactile in a very interesting way. I like that the supplies for this project are accessible to anyone, and create a great finished project.

Today's project is created by sewing on nuts in a grid with a needle and thread to a plain clutch that you already own, or picked up for cheap. I hope you enjoy and will please share with me your own projects if you decide to make one!

DSC_1258

The supplies you will need are a zip top clutch (I used a makeup bag from a department store freebie), 20 silver nuts (or however many you would like), thread that matches the clutch, needle, a ruler, a pencil, and a sheet of paper. You will also need scissors although they are not pictured.

DSC_1259

Begin by tracing the outline of the clutch onto the sheet of paper in pencil.

DSC_1261

Using the ruler, draw a grid onto the shape of the clutch. Decide how many nuts you are going to use. I decided to use 20 to fill the entire face of the clutch, with 5 columns and 4 rows.

DSC_1262

After cutting out around the outline of the clutch, lay the template over the bag. Using your needle, pin poke each hole onto the bag. This will make sure your grid is straight and even, but won't leave behind a noticeable mark on the clutch.

DSC_1266

Begin sewing each nut onto the clutch. I suggest doubling up your thread and tying the knot at the bottom to create a stronger stitch. Come up from the back of your clutch with the needle through a pre-marked pin poke. Note how I sewed on each side of the nut. I did about 3 to 4 stitches on each side to secure.

DSC_1264

Continue sewing on each of your nuts. This will take some time so work on it while watching your favorite movie!

DSC_1283

Here is the finished product! I'm very excited about my new clutch, especially because it will add a great pop of color to monochromatic outfits! Thanks for reading and good luck with your own projects!

Follow along on Facebook here, Twitter here, or on Instagram @punkrockparti