DIY_Pegboard Organizer

DSC_0782 Today I found this scrap of pegboard in the wood shop at my school, and I knew I had to make something with it! I decided to go for the most typical use for the material--an organizer. But, I was in desperate need of a way to store all of my bracelets so I couldn't resist!

DSC_0775

You will need some pegboard, a drill, 2 screws, and these long strips of hooks which I found at Home Depot for about 2 bucks each.

DSC_0779

Simply screw the pegboard into your wall at the top corners. Don't screw all the way into the wall because when you slide in the hooks, they will need to rest against the wall.

DSC_0780

Slide in the hooks into the holes. I offset mine for an asymmetrical look.

DSC_0785

Finally, hang up your jewelry! You can also use the holes to hang up longer earrings.

DSC_0784

And here's the finished product! I'm so happy with this and it was really fast to hang up.

Thanks for reading! Check out all of my other DIY projects or keep up with my process on Instagram @punkrockparti

DIY_Hardware Beaded Necklace

IMG_0042 Have you ever DIYed something to go with a specific outfit? Well, that's how I got the idea for this necklace. I recently purchased this metallic shirt from Urban Outfitters on sale to wear during the holidays. It worked great for Christmas Eve with my family, but I was worried about how to style it afterwards in more casual situations.

I decided that I needed a necklace that was bold and industrial that toned down the impact of the shirt. I chose to work with a simple black cord and silver hardware to create this cinched necklace. It reminds me of my DIY Hardware Headband and is really simple. I hope you enjpy this tutorial and try to make one of your own!

IMG_0026

You will need: black decorative trim (mine is from Hobby Lobby), scissors, 3 nuts, and clear nail polish.

IMG_0028

First, cut a piece of cord that fits around your neck and over your head, and then leave extra length on both ends as well. At this point, you can use the clear nail polish to prevent the ends from fraying. However, if you tie on knots like I did, you can probably get away without using it.

IMG_0030

Fold the cord in half and thread a nut through both ends of the cord. Put the loop over your head, and position the nut so that it is in a place where you can comfortably put the necklace over your head without moving the nut around. My nut was snug enough that I didn't need to knot the cord.

IMG_0031

Next, on the ends of the cord, thread on a nut and tie a knot at the bottom.

IMG_0041

Do the same for each end, and also add a knot above each nut to keep them in place.

IMG_0050

Here's my finished product! I'm really happy with how it compliments my top, and now am excited to wear it in casual settings!

Want to purchase a necklace like this? I have another for sale on my Etsy! Check out the listing here.

Thanks for reading, and don't forget to follow me on Instagram @punkrockparti or any of my other social media platforms!

DIY_Hardware Studded Clutch

HoliDIY TemplateDSC_1296

The hardware trend is one that I don't think should die out any time soon. DIY projects with supplies from the hardware store are inexpensive, industrial, and tactile in a very interesting way. I like that the supplies for this project are accessible to anyone, and create a great finished project.

Today's project is created by sewing on nuts in a grid with a needle and thread to a plain clutch that you already own, or picked up for cheap. I hope you enjoy and will please share with me your own projects if you decide to make one!

DSC_1258

The supplies you will need are a zip top clutch (I used a makeup bag from a department store freebie), 20 silver nuts (or however many you would like), thread that matches the clutch, needle, a ruler, a pencil, and a sheet of paper. You will also need scissors although they are not pictured.

DSC_1259

Begin by tracing the outline of the clutch onto the sheet of paper in pencil.

DSC_1261

Using the ruler, draw a grid onto the shape of the clutch. Decide how many nuts you are going to use. I decided to use 20 to fill the entire face of the clutch, with 5 columns and 4 rows.

DSC_1262

After cutting out around the outline of the clutch, lay the template over the bag. Using your needle, pin poke each hole onto the bag. This will make sure your grid is straight and even, but won't leave behind a noticeable mark on the clutch.

DSC_1266

Begin sewing each nut onto the clutch. I suggest doubling up your thread and tying the knot at the bottom to create a stronger stitch. Come up from the back of your clutch with the needle through a pre-marked pin poke. Note how I sewed on each side of the nut. I did about 3 to 4 stitches on each side to secure.

DSC_1264

Continue sewing on each of your nuts. This will take some time so work on it while watching your favorite movie!

DSC_1283

Here is the finished product! I'm very excited about my new clutch, especially because it will add a great pop of color to monochromatic outfits! Thanks for reading and good luck with your own projects!

Follow along on Facebook here, Twitter here, or on Instagram @punkrockparti