DIY_Patched Denim Jacket + Video

DIY INTRO Today I've got a classic DIY project for you, a patched denim jacket. While you may know how to sew on a patch, I wanted to share the little patch collection I've been building for a few months now, and how my final product turned out! I was also wanting to play around with my new camera now that I could record HD video, and this seemed to be the perfect project to start with! Check out my video, or see the photos of my jacket below!

[youtube http://www.youtube.com/watch?v=j-SAV4MEAbs&w=560&h=315]

IMG_0082

yin yang patch_local record store american flag patch_came with camo jacket Rancid patch_Amoeba records Amoeba patch_Amoeba records daisy chain patch_local craft store

IMG_0116

I picked up this jacket over the summer at Goodwill. You may remember it from this outfit post!

Thanks so much for reading! I'll be back tomorrow with an outfit post wearing my jacket!

Don't forget to follow Punkrockparti on bloglovin'!

DIY_Men's Denim Vest and Lookbook

Hey everyone! Today I'm sharing a new DIY/thrift project with you. Although this was a men's jacket, you can really make it for anyone you'd like. Also, this project is really customizable, you can add any patches or painted design that you'd like! Let's get started, shall we?

1_Find your jacket. When I first saw this jacket at the Goodwill, I was disappointed that it had an embroidered logo on the front and back. But then I realized that this was just more of an opportunity to do something fun. I was lucky to pick this one up for $5. 2_On the back of the jacket, measure the area you need in order to completely cover the design. Mine was about 10 by 15 inches. 3_Trace out your measurements with a ruler and a white colored pencil onto your fabric. I used a black tee that I picked up at the Goodwill for $1.50. 4_Cut out the fabric and make sure you're happy with the size of it.

5_Next, sketch out your image on some paper. Laying the paper over the jacket will help give you a good idea of what size to make the drawing. 6_Cut the stencil out with an X-acto knife to create a stencil. 7_Lay the stencil over your fabric and trace the design with your while pencil. 8_Paint in your design with fabric paint. 9_While you're waiting for the paint to dry, cut the sleeves off of your jacket. Start by cutting along the seam where the sleeve meets the jacket. Then, remove more to give you the best fit for your vest. 10_Go over the design with a second coat of fabric paint to give it a finished look. Finally, pin the black fabric to the vest and stitch on either by hand or sewing machine. I chose to sew it by hand to make sure the fabric stayed straight on the vest. Finally, I attached a patch to the front of the vest to cover the other logo.

And here's the finished product! I made it for my friend Jake, and he liked it enough that he agreed (aka i begged him) to do a lookbook. Thanks Jake ^_^